R&H Roofing

A roof replacement involves fully removing the shingles and underlayment on your roof to reveal the decking. The decking will be inspected and repaired, if needed, and then new underlayment will be laid to protect the decking from water. Next, the shingles are put on, which may consist of asphalt, metal, composite, or another material. You can also choose between 3-tab, architecural, and luxury shingles, based on your budget and preferred style.

If your roof is damaged or leaking and is less than 15 years old, a roof repair can be more practical than full replacement. Common repairs include replacement of shingles and/or fascia boards, patching leaks, and fixing improperly installed flashing.

During new roof installation, your home gets a new underlayment and shingles over the roof decking. You can choose between 3-tab and architectural shingles, which can be made of asphalt, wood, composite, metal, or another material. New roofs last 20-30 years for less expensive materials, while slate, copper, or tile can last 50 years or longer.

The shingles on your home are both protective and decorative. These overlapping pieces of asphalt, wood, clay, slate, metal, or composite materials create a waterproof barrier that protects your home from the elements. They are available in multiple colors and include 3-tab, architecural, or luxury varieties. Asphalt shingles are the most common and budget-friendly, while clay, wooden, or composite shingles can add character and style to your home.

Flat roofing isn't truly flat, it's very lowly sloped and appears almost flat. It's common in commercial buildings because it's energy efficient and an easy and cost-effective way to roof a very large area. There are three types of flat roofing systems: membrane roofing, built-up roofing, and modified bitumen roofing. Flat roofs are challenging to maintain in cold weather and need to be replaced more often than sloped roofs.

Roof flashing is used to direct water away from areas of the roof where water might pool or penetrate. Flashing is made of metal, usually galvanized steel, and directs water down to the shingles and off the roof. Base flashing surrounds features like chimneys, step-flashing protects where the roof meets the wall, and drip edges help prevent leaks at the edge of the roof.

Soffits and facia are more than just nice trim -- they help protect your roof. The soffit is below the overhang at the edge of the roof and protects the home from water under the eaves while providing ventilation for the attic. The facia runs alongside the roof overhang and supports the shingles and gutter system. They are generally made of the same material as your home siding and need regular inspection to watch for deterioration.