Jms Roofing & Sheet Metal, Inc.

A roof replacement involves fully removing the shingles and underlayment on your roof to reveal the decking. The decking will be inspected and repaired, if needed, and then new underlayment will be laid to protect the decking from water. Next, the shingles are put on, which may consist of asphalt, metal, composite, or another material. You can also choose between 3-tab, architecural, and luxury shingles, based on your budget and preferred style.

If your roof is damaged or leaking and is less than 15 years old, a roof repair can be more practical than full replacement. Common repairs include replacement of shingles and/or fascia boards, patching leaks, and fixing improperly installed flashing.

During new roof installation, your home gets a new underlayment and shingles over the roof decking. You can choose between 3-tab and architectural shingles, which can be made of asphalt, wood, composite, metal, or another material. New roofs last 20-30 years for less expensive materials, while slate, copper, or tile can last 50 years or longer.

Commercial roofing tends to have very little slope or be entirely flat, with a focus on being strong enough to hold requied equipment. Commercial roofing can be single ply, built-up, metal, and more. Because they're flat, commercial roofs require more maintenance.

The shingles on your home are both protective and decorative. These overlapping pieces of asphalt, wood, clay, slate, metal, or composite materials create a waterproof barrier that protects your home from the elements. They are available in multiple colors and include 3-tab, architecural, or luxury varieties. Asphalt shingles are the most common and budget-friendly, while clay, wooden, or composite shingles can add character and style to your home.

Membrane roofing is easy to install and cost effective. It's used for flat or low-sloping roofs, which are largely on commercial buildings. There are three types, EPDM, TPO, and PVC, which are different types of material used to create the membrane. Maintenance includes regular cleaning, inspection for damage, and prompt repairs of any issues.

Flat roofing isn't truly flat, it's very lowly sloped and appears almost flat. It's common in commercial buildings because it's energy efficient and an easy and cost-effective way to roof a very large area. There are three types of flat roofing systems: membrane roofing, built-up roofing, and modified bitumen roofing. Flat roofs are challenging to maintain in cold weather and need to be replaced more often than sloped roofs.

Roof flashing is used to direct water away from areas of the roof where water might pool or penetrate. Flashing is made of metal, usually galvanized steel, and directs water down to the shingles and off the roof. Base flashing surrounds features like chimneys, step-flashing protects where the roof meets the wall, and drip edges help prevent leaks at the edge of the roof.