Canton Construction Corp

A roof replacement involves fully removing the shingles and underlayment on your roof to reveal the decking. The decking will be inspected and repaired, if needed, and then new underlayment will be laid to protect the decking from water. Next, the shingles are put on, which may consist of asphalt, metal, composite, or another material. You can also choose between 3-tab, architecural, and luxury shingles, based on your budget and preferred style.

If your roof is damaged or leaking and is less than 15 years old, a roof repair can be more practical than full replacement. Common repairs include replacement of shingles and/or fascia boards, patching leaks, and fixing improperly installed flashing.

During new roof installation, your home gets a new underlayment and shingles over the roof decking. You can choose between 3-tab and architectural shingles, which can be made of asphalt, wood, composite, metal, or another material. New roofs last 20-30 years for less expensive materials, while slate, copper, or tile can last 50 years or longer.

The shingles on your home are both protective and decorative. These overlapping pieces of asphalt, wood, clay, slate, metal, or composite materials create a waterproof barrier that protects your home from the elements. They are available in multiple colors and include 3-tab, architecural, or luxury varieties. Asphalt shingles are the most common and budget-friendly, while clay, wooden, or composite shingles can add character and style to your home.

Metal roofing can be made of aluminum, copper, corrugated metal, or stone-coated steel. It's very long-lasting, durable, and energy efficient, making it a popular roofing material for both residential and commercial buildings.

Tile roofing is attractive, durable, and environmentally friendly. Tiles are made from slate, clay, or concrete, and are an excellent choice for buildings in hot areas or those exposed to salt air near the ocean. However, tile is a more expensive roof material and is also very heavy.

Membrane roofing is easy to install and cost effective. It's used for flat or low-sloping roofs, which are largely on commercial buildings. There are three types, EPDM, TPO, and PVC, which are different types of material used to create the membrane. Maintenance includes regular cleaning, inspection for damage, and prompt repairs of any issues.

A roof inspection may be required by your homeowner's insurance, or you may get an inspection to check for damage before deciding on roof repair or replacement. During a roof inspection, a professional will look at the shingles, flashing, gutters, and more to determine the condition of the roof and provide an estimate on how long it may be until you need replacement. Some inspectors will climb on the roof for a physical inspection, while others will make an assessment from the ground. Others will use more advanced drone or infrared technologies. Regular inspections may be included in the homeowner's routine roof maintenance.

Flat roofing isn't truly flat, it's very lowly sloped and appears almost flat. It's common in commercial buildings because it's energy efficient and an easy and cost-effective way to roof a very large area. There are three types of flat roofing systems: membrane roofing, built-up roofing, and modified bitumen roofing. Flat roofs are challenging to maintain in cold weather and need to be replaced more often than sloped roofs.

During gutter installation, professional roofers will remove the old gutters and downspouts from the eaves and brackets and check for damage such as rotted or failing boards and facia. From there, they will measure for new gutters, install them, and put on new downspouts and elbows. Finally, they'll clean the area and leave your home ready for the next rainstorm!

Roof flashing is used to direct water away from areas of the roof where water might pool or penetrate. Flashing is made of metal, usually galvanized steel, and directs water down to the shingles and off the roof. Base flashing surrounds features like chimneys, step-flashing protects where the roof meets the wall, and drip edges help prevent leaks at the edge of the roof.