Assurance Roofing

A roof replacement involves fully removing the shingles and underlayment on your roof to reveal the decking. The decking will be inspected and repaired, if needed, and then new underlayment will be laid to protect the decking from water. Next, the shingles are put on, which may consist of asphalt, metal, composite, or another material. You can also choose between 3-tab, architecural, and luxury shingles, based on your budget and preferred style.

If your roof is damaged or leaking and is less than 15 years old, a roof repair can be more practical than full replacement. Common repairs include replacement of shingles and/or fascia boards, patching leaks, and fixing improperly installed flashing.

The shingles on your home are both protective and decorative. These overlapping pieces of asphalt, wood, clay, slate, metal, or composite materials create a waterproof barrier that protects your home from the elements. They are available in multiple colors and include 3-tab, architecural, or luxury varieties. Asphalt shingles are the most common and budget-friendly, while clay, wooden, or composite shingles can add character and style to your home.

Flat roofing isn't truly flat, it's very lowly sloped and appears almost flat. It's common in commercial buildings because it's energy efficient and an easy and cost-effective way to roof a very large area. There are three types of flat roofing systems: membrane roofing, built-up roofing, and modified bitumen roofing. Flat roofs are challenging to maintain in cold weather and need to be replaced more often than sloped roofs.

Skylights can bring in natural light, improve ventilation, and add architectural interest to your home. However, if your skylight is leaking, cracked, fogging over, or showing signs of water damage, it's important to contact a professional to schedule skylight repair. Roofers can replace skylight flashing and seals, broken or damaged glass, or open/close mechanisms that no longer work.

During gutter installation, professional roofers will remove the old gutters and downspouts from the eaves and brackets and check for damage such as rotted or failing boards and facia. From there, they will measure for new gutters, install them, and put on new downspouts and elbows. Finally, they'll clean the area and leave your home ready for the next rainstorm!

Roof flashing is used to direct water away from areas of the roof where water might pool or penetrate. Flashing is made of metal, usually galvanized steel, and directs water down to the shingles and off the roof. Base flashing surrounds features like chimneys, step-flashing protects where the roof meets the wall, and drip edges help prevent leaks at the edge of the roof.

Roof waterproofing can provide an extra layer of protection against leaks in case shingles or other parts of the roof get damaged. Professional roofers will lay a base sheet or membrane under the usual underlayment and shingles. They'll also check the flashing around the vents, chimney, and skylights. If you have a flat roof, liquid membranes can be applied to improve waterproofing.

Having a fireplace installed can be simple if you choose a gas insert, or more complex for a traditional wood-burning option. For a traditional fireplace, a professional mason builds the chimney and hearth, including the chimney foundation and stack. Then fireplace installers put in the firebox and liner. Maintaining the fireplace includes cleaning the firebox of ash and buildup, yearly professional chimney cleaning, and repair of any broken or damaged masonry. For gas fireplace installation, the contractor can cut out the area for the insert, run electric and gas lines, and build a vent. Then the insert can be installed. Maintaining a gas fireplace involves cleaning the glass front and trim, checking for damage around the fireplace or vent, and having a professional repair it if needed.